Справочник Пользователя для Industrial Service Technology PC0285
Congratulations on your
purchase of the IST remote
starting system. It was
designed for years of
trouble free use and ease of
operation. Just hook up the
receiver to the microphone
jack on your start and you
are “wired” for sound!
purchase of the IST remote
starting system. It was
designed for years of
trouble free use and ease of
operation. Just hook up the
receiver to the microphone
jack on your start and you
are “wired” for sound!
Please take a moment to
read this owners manual to
become familiar with the
features, operation and
warranty information.
read this owners manual to
become familiar with the
features, operation and
warranty information.
GENERAL
The RF remote starting
system consists of a
handheld transmitter
powered by a standard 9V
battery and a receiver that
plugs directly in to your
existing starting device.
system consists of a
handheld transmitter
powered by a standard 9V
battery and a receiver that
plugs directly in to your
existing starting device.
If you are using the IST
SWIMSTART the power is
supplied through the
connection to the receiver.
If you are using another
SWIMSTART the power is
supplied through the
connection to the receiver.
If you are using another
starting device a 9V battery
is also required for the
receiver. The receiver
plugs into the microphone
jack and mounts onto the
starting device using the
Velcro strips supplied.
is also required for the
receiver. The receiver
plugs into the microphone
jack and mounts onto the
starting device using the
Velcro strips supplied.
The radio frequency link is
in the 900 MHz frequency
range and no license is
required for operation.
in the 900 MHz frequency
range and no license is
required for operation.
FCC NOTICE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If
this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
•
Reorient or relocate the receiving
antenna.
antenna.
•
Contact International Sports
Timing for assistance. 800-835-
2611.
Timing for assistance. 800-835-
2611.
•
MODIFICATIONS NOT
EXPRESSELY APPROVED BY
IST COULD VOID YOUR
AUTHORITY TO OPERATE
THE EQUIPMENT.
EXPRESSELY APPROVED BY
IST COULD VOID YOUR
AUTHORITY TO OPERATE
THE EQUIPMENT.
OPERATION
RECEIVER MOUNTING
For best reception the
receiver should be mounted
so that the antenna has as
clear a view as possible of
the site where the starter
will be standing. Anyplace
where the antenna extends
above the case will provide
a transmission range in
excess of 50 yards in most
applications.
receiver should be mounted
so that the antenna has as
clear a view as possible of
the site where the starter
will be standing. Anyplace
where the antenna extends
above the case will provide
a transmission range in
excess of 50 yards in most
applications.
Although it is not necessary
for the operation of the
device that the LED lights
are visible, they were
incorporated into the design
to continually monitor for
outside interference, as well
for the operation of the
device that the LED lights
are visible, they were
incorporated into the design
to continually monitor for
outside interference, as well
as inform the starter of the
recall time period.
recall time period.
They can also be used to
help diagnose problems that
may occur with the receiver
or the start they are
connected to.
INITIAL SET-UP
help diagnose problems that
may occur with the receiver
or the start they are
connected to.
INITIAL SET-UP
Once the receiver has been
connected to the start
device and the power has
been turned on, select any
of 8 channels (0-7) by
depressing either of the
small buttons located on the
channel selector switch.
connected to the start
device and the power has
been turned on, select any
of 8 channels (0-7) by
depressing either of the
small buttons located on the
channel selector switch.
Monitor the yellow
“Carrier” LED to ensure it
is NOT on at this time. If it
is lit it indicates that there
is other activity on this
channel and another
channel should be selected.
“Carrier” LED to ensure it
is NOT on at this time. If it
is lit it indicates that there
is other activity on this
channel and another
channel should be selected.
Next move the channel
select switch on the
transmitter to the same
select switch on the
transmitter to the same