Справочник Пользователя для Street Smart Security Inc. CEREMDW

Door Sensor 

(door sensor & magnet separately on door/ window and door/ window frame) 

CEREMDW 

User Manual 

Place CEREMDW 

. A signal will be sent to control. If door/ window is open 

which will be detected by CEREMDW. User will be alerted if the door/ window 

is open. 

The Door sensor is designed for your full protection including switch. It gives 

you all angles of protection you can even think of. 

 

z  PRODUCT SPECIFICATION 

Operating Frequency:   433.92MHz+-150KHz 

Operating Temperature: -20 to 60 C (-4 to 140 F) 

Battery:               3VDC Panasonic CR2032 Lithium battery * 2pcs 

Battery Life:             2 years (under normal usage) 

Dimensions (W*H*D):  35.76*57.58*15.20mm 

Build-in Detector:       Tamper, Back, Reed Switch   

Type of Modulation:     ASK 

 

z  BATTERY REPLACEMENT 

Remove the cover by pressing on the end notch to lift top cover. Unscrew the 

screw on the PCB and remove the PCB. Use care when installing the battery 

and observe the correct polarity. Use ONLY the CR2032 lithium battery. 

 

 

 

This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

[1]  this device may not cause harmful interference and 

[2]  this device must accept any interference received, including 

interference that may cause undesired operation. 

      S/N：   

Made in Taiwan