Справочник Пользователя для SmartSight Networks Inc MF24
9
_____________________________________________________________________________________________
Microflex AV/ADV/AVr/ADVr North-American user’s manual / Rev 1.4
CHAPTER 2 Microflex installation and operation
Your Microflex shipment should contain the following items:
• Microflex module with requested options
• Pole mounting bracket with two (2) stainless steel collars (for
0.75-2 inch poles unless an optional mount has been ordered)
• 15 VDC external power supply (Optional)
• Antenna (Optional)
• Microflex configuration sheet
• User’s manual (one set per system ordered)
• MNM based configuration diskettes (one set per system ordered)
___________________________________________________________________
Check the material against the packing list to make sure you have received everything. If
something is missing or if you discover shipping damage, please contact your distributor.
___________________________________________________________________
2.1 Microflex Setup Guide
The MicroFlex is to be professionally installed. The guidelines in the following
subsection will assist the installer in cabling and installing the Microflex.
STEP 1 Installing the Microflex module
The Microflex is shipped with a mounting bracket. This bracket is supplied with a
special water-sealing gel backing. This backing must not be removed in order to
maintain the enclosure weather-tight feature. Three (3) stainless steel screws are
also supplied to install the bracket on the back of the Microflex enclosure. Mount
the bracket to the back of the enclosure and align the screws with the mounting
holes. Tighten the three (3) screws firmly while being careful not to strip the
aluminum threads. Some gel may flow out from under the bracket while tightening.
This extra gel can be removed with water and mild soap or an alcoholic solution.
Using the mounting bracket and collars supplied, the Microflex can be mounted on
any pole with a 18-50 mm (0.75-2.0 inch) diameter. ComLink also supplies
mounting brackets for mounting on walls and larger collar size for mounting on light
poles or other large diameter poles. Contact ComLink factory if you require a
different mounting option than the one supplied.