Справочник Пользователя для Microsoft Corporation RM-127
S e t t i n g s
54
IR connection indicator
When
is shown continuously, the IR connection is activated, and
your phone is ready to send or receive data through its IR port.
When
blinks, your phone is trying to connect to the other device, or
a connection has been lost.
Packet data (EGPRS)
Enhanced general packet radio service (EGPRS), packet data, is a
network service which allows mobile phones to send and receive data
over an Internet protocol (IP)-based network. It enables wireless access
to data networks such as the Internet.
network service which allows mobile phones to send and receive data
over an Internet protocol (IP)-based network. It enables wireless access
to data networks such as the Internet.
The applications that may use packet data are MMS, browsing sessions,
e-mail, remote SyncML, Java application downloading, push to talk,
instant messaging, and the PC dial-up.
e-mail, remote SyncML, Java application downloading, push to talk,
instant messaging, and the PC dial-up.
To define how to use the service, select
Menu
>
Settings
>
Connectivity
>
Packet data
>
Packet data connection
.
Select
When needed
to set the packet data connection to be established
when an application needs it. The connection will be closed when the
application is terminated.
application is terminated.
Select
Always online
to set the phone to automatically connect to an
packet data network when it is switched on.
indicates a packet data connection.
Modem settings
You can connect the phone using an IR or a data cable (CA-42)
connection to a compatible PC, and use the phone as a modem to enable
packet data connectivity from the PC.
connection to a compatible PC, and use the phone as a modem to enable
packet data connectivity from the PC.
To define the settings for connections from the PC, select
Menu
>
Settings
>
Connectivity
>
Packet data
>
Packet data settings
>
Active
access point
, activate the access point you want to use, and select
Edit
active access point
. Select
Alias for access point
, and enter a nick name
for the currently selected access point. Select
Packet data access point
,
and enter the access point name (APN) to establish a connection to an
EGPRS network.
EGPRS network.