Справочник Пользователя для Interepoch Technology Inc. IWE1300
10
2.4.4. Step 3: Configuring IEEE 802.11 Settings
Fig. 7. IEEE 802.11b communication settings.
Go to the IEEE 802.11, Communication section to configure IEEE 802.11b-related communication
settings, including Regulatory domain, Channel number, and Network name (SSID).
settings, including Regulatory domain, Channel number, and Network name (SSID).
The number of available RF channels depends on local regulations; therefore you have to choose an
appropriate regulatory domain to comply with local regulations. The SSID of a wireless client com-
puter and the SSID of the AP must be identical for them to communicate with each other.
appropriate regulatory domain to comply with local regulations. The SSID of a wireless client com-
puter and the SSID of the AP must be identical for them to communicate with each other.
When you are finished, click Save at the bottom of this page, and then you are brought back to the
start page.
start page.
2.4.5. Step 4: Reviewing and Applying Settings
Fig. 8. Settings changes are highlighted in
red
.
On the start page, you can review all the settings you have made. Changes are highlighted in
red
. If
they are OK, click Restart to restart the AP for the new settings to take effect.
NOTE:
About 7 seconds are needed for the AP to complete its restart process.