Справочник Пользователя для Wellink Corporation W201ER

2. Accessing the 201ER

Follow these instructions to open a connection to the 201ER.

A. Start your web browser (i.e. Internet Explorer or Netscape) and enter 10.0.0.2 in the browsers

address field. 10.0.0.2 is the factory default for the 201ER LAN IP address. If you change the

LAN IP address, you must enter your new IP address in the browser’s address field.

B. The Enter Network Password window appears. Type your user name and password to access the

main page of the 201ER. The 201ER provides two levels of access: User and Administration.

For User level access, the Username is “user” and the Password is “password”. If you choose

to login as a User, you can only view settings.

For Administration level access, the Username is “admin” and the Password is “visionnet”. If

you choose to login as an Administrator, you have full access to the 201ER.

If you cannot access the 201ER menu, check the following:

★ Your PC has not received an IP address from the 201ER. Your PC should have received a 10.0.0.X

address.Try to release and renew your IP address on your PC.

★

You have not received an IP address from the 201ER. If you are using WIN95/98, click on Start -

Run and type "winipcfg" and click on the release button and then the renew button. If you are using

WIN2000/NT/XP, click on Start - Run and type "cmd". This will open a dos window and type "ipconfig

/renew". In both cases, the Default Gateway should be the address of your 201ER.

★

Hit the Reset button located on the back of the unit. This will set your 201ER back to factory defaults,

and then try the step mentioned above.

C. The Main Page appears first when you use a web browser to access the 201ER. The menu on the left

contains four menu items: Quick Setup, Configuration, Status and Maintenance.