Справочник Пользователя для Wellink Corporation W202ER-4
VisionNet 202ER-4 ADSL Ethernet Router User’s Guid
83
Viewing the IP Routing Table
All IP-enabled computers and routers maintain a table of IP
addresses that are commonly accessed by their users. For each of
these destination IP addresses, the table lists the IP address of the
first hop the data should take. This table is known as the device’s
routing table.
addresses that are commonly accessed by their users. For each of
these destination IP addresses, the table lists the IP address of the
first hop the data should take. This table is known as the device’s
routing table.
To view the VisionNet 202ER-4’s routing table, the System Status
tab, and then click
tab, and then click
Routing Table
in the task bar. The IP Route page
displays by default, as shown in Figure 32. IP Route Table Page:
Figure 32. IP Route Table Page
The IP Route Table displays a row for each existing route. These
include routes that were predefined on the device, routes you may
have added, and routes that the device has identified automatically
through communication with other devices.
include routes that were predefined on the device, routes you may
have added, and routes that the device has identified automatically
through communication with other devices.
The routing table should reflect a default gateway, which directs
outbound Internet traffic to your ISP. This default gateway is shown
in the row containing destination address 0.0.0.0.
outbound Internet traffic to your ISP. This default gateway is shown
in the row containing destination address 0.0.0.0.