Справочник Пользователя для Comba Telecom Ltd. MBDA-200S
USER MANUAL FOR MBDA-200S
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 10
1 GENERAL INFORMATION
The mBDA-200S Band Selective Wireless Repeater is designed for operation in 700LowerABC,
700UpperC, 850MHz, 1900MHz, AWS and 2600MHz networks.Digital band-specific linear amplifier
amplifies the desired BTS carriers and provides superior out-of-band rejection. Typical units with
adjustable bandwidth are programmed to specific requirements of the network. Remote configuration and
surveillance is possible through Comba’s remote control and monitoring system, via PC or Ethernet to the
OMC.
Main feature:
700UpperC, 850MHz, 1900MHz, AWS and 2600MHz networks.Digital band-specific linear amplifier
amplifies the desired BTS carriers and provides superior out-of-band rejection. Typical units with
adjustable bandwidth are programmed to specific requirements of the network. Remote configuration and
surveillance is possible through Comba’s remote control and monitoring system, via PC or Ethernet to the
OMC.
Main feature:
mBDA-200S is a high quality repeater with the following features:
Supports GSM, CDMA, WCDMA and LTE operating.
Supports multi operator configurations and up to 3 sub bands per band.
Adjustable sub band via Web OMT software.
Friendly and easy Web OMT interface via RJ45 connection.
Integrated network card for remote configuration, monitoring and control.
The figure below shows the enclosure.
Figure 1: mBDA-200S
NOTE: RF module is slot undependent.
End of Section