Справочник Пользователя для Spectralink Corporation K023B
Spectralink 7202, 7212 User Guide
14226907 Version 5.0
October, 2015
October, 2015
5
•
Charger part number: 8464 2488
•
Handset Management Cradle with USB connection part number: 8464 2489
•
Power supply for charger part number: 8464 2601
•
USB cable for Handset Management Cradle
part number: 8471 8504
Battery Information
The battery is connected to the handset from factory and must not be removed. To replace the
battery, please contact your local distributor.
battery, please contact your local distributor.
The only battery that can be used for the Spectralink 7202 and Spectralink 7212 is the following:
•
Battery
part number: 8474 3428.
Charging Battery
When charging battery for the first time, it is necessary to leave handset in charger for 5 hours for
the battery to be fully charged.
the battery to be fully charged.
During normal operation, it takes approximately 5 hours to charge the handset from fully
discharged to its full capacity.
discharged to its full capacity.
Turning the backlight off reduces charging time with approximately
2 hours.
•
Place handset in charger.
For correct charging, be sure the room temperature is between 0°C and 40°C. Do not place the
handset in direct sunlight. The battery has a built-in heat sensor which will stop charging if the
battery temperature is too high.
handset in direct sunlight. The battery has a built-in heat sensor which will stop charging if the
battery temperature is too high.
If the handset is turned off when placed in charger, nothing indicates the charging. There will be
no reaction on incoming calls.
no reaction on incoming calls.
If the handset is turned on when charging, the display shows the blue charging icon in the
status bar. The charging icon is replaced by the green fully charged icon , when the battery is
fully charged (when handset is removed from charger, the charging icon disappears). The handset
will not vibrate. Auto answer is inactive. The handset reacts normally for incoming calls.
status bar. The charging icon is replaced by the green fully charged icon , when the battery is
fully charged (when handset is removed from charger, the charging icon disappears). The handset
will not vibrate. Auto answer is inactive. The handset reacts normally for incoming calls.
The Spectralink 7202 and 7212 handset LEDs are red when charging and green when fully
charged.
charged.
It is necessary to recharge battery when the display shows the battery low icon , or if the
handset cannot be turned on.
handset cannot be turned on.
Note
The Handset Management Cradle is a tool only for configuring the handset. It should not be
used for charging the handset.
used for charging the handset.