Справочник Пользователя для Spectralink Corporation PP6N40-1G9
Note: If one of the systems not chosen is removed, the handset remains connected to
the system in use.
1.11.4.3 Creating a Login
To create a login, the system must allow subscriptions to be made. Some systems also
require an Authentication Code (AC). If more than one system currently permits sub-
scription, you will need to know the ID of the system to which you want to subscribe.
Authentication Codes and system ID’s will be provided be the system administrator.
You can subscribe up to 10 systems, that is create 10 logins.
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Advanced
and press
Select
.
Scroll to
Login
and press
Select
.
Scroll to
Create login
and press
Select
. The handset will start searching for a
system.
Scroll to the found system and press
Scroll to the found system and press
Select
.
If required, enter an AC Code and press
Ok
to connect to the system.
Press
Ok
.
Note: If the handset is already subscribed to 10 systems, you will have to remove a
subscription before creating a new subscription (refer to
).
1.11.4.4 Selecting Login Automatically
When auto login is turned on, the handset automatically change to another system
when necessary. Auto login should only be used when systems are separate, with no
overlaps.
Note: To activate auto login your handset must be subscribed to at least two systems.
Note: To activate auto login your handset must be subscribed to at least two systems.
Press
Menu
to enter main menu.
Scroll to
Settings
and press
Select
.
Scroll to
Advanced
and press
Select
.
Scroll to
Login
and press
Select
.
Scroll to
Auto login
and press
Select
.
If
Off
is selected, press
Change
to select
On
.
The handset automatically selects a system. The selected system is marked with an
A.