Справочник Пользователя для Microsoft Corporation BH-607

may present a risk of fire, explosion, or 
other hazard.

When you disconnect the power cord of 
any accessory, grasp and pull the plug, 
not the cord.

1. Connect the charger to a wall 

outlet. 

2. Connect the charger cable to the 

charger connector. The red 
indicator light is displayed during 
charging. Charging the battery 
fully may take up to 1 hour.

3. When the battery is fully charged, 

the green indicator light is 
displayed. Disconnect the charger 
from the headset, then from the 
wall outlet.

The fully charged battery has power 
for up to 7 hours of talk time or up to 
160 hours of standby time.

To check the battery charge when the 
headset is not connected to a charger, 
press the power key when the headset 

is connected to a mobile device. If the 
indicator light is green, the charge 
level is sufficient. If the light is yellow, 
you may need to recharge the battery 
soon. If the light is red, recharge the 
battery.

When the battery charge is low, the 
headset beeps every 5 minutes and 
the red indicator light flashes.

To switch on, press and hold the power 
key for about 2 seconds. The headset 
beeps, and the green indicator light 
flashes slowly while the headset tries 
to connect to one or two last 
connected devices. When the headset 
is connected to at least one device and 
is ready for use, the blue indicator 
light flashes slowly. If the headset has 
not been paired with a device, it 
automatically enters pairing mode.

To switch off, press and hold the 
power key for about 2 seconds. The