Справочник Пользователя для Microsoft Corporation BH-905

with your mobile device, disconnect the headset from it before pairing 
the headset with the music player.

1. Ensure that your mobile device or music player is switched on.

2. To pair the headset if it has not been previously paired with a device, 

activate Bluetooth connectivity on the headset. The headset enters 
pairing mode, and the Bluetooth indicator light starts to flash blue 
quickly.

To pair the headset if it has been previously paired with a device, 
ensure that Bluetooth connectivity is deactivated on the headset, 
and press and hold the multifunction key (for about 5 seconds) until 
the blue indicator light starts to flash quickly.

3. Within about 3 minutes, activate Bluetooth connectivity on your 

mobile device or music player, and set it to search for Bluetooth 
devices. For instructions, see the user guide of your device .

4. Select the headset from the list of found devices on your mobile 

device or music player.

5. If necessary, enter the passcode 0000 to pair and connect the 

headset to your device. If your device does not have a keypad, it may 
use this passcode by default.

In some devices, you may need to make the connection separately 
after pairing. You only need to pair the headset with your device 
once.

If pairing is successful, the headset appears in the menu of your device 
where you can view the currently paired Bluetooth devices.

When the headset is connected to your device and is ready for use, the 
Bluetooth indicator light flashes blue slowly.

You can pair the headset with up to eight devices but connect it to only 
one device supporting the HFP Bluetooth profile and another device 
supporting the A2DP Bluetooth profile at a time.

To disconnect the headset from your Bluetooth device, deactivate 
Bluetooth connectivity on the headset, or disconnect the headset in the 

9216273_en1.fm  Page 10  Tuesday, May 26, 2009  12:02 PM