Справочник Пользователя для Microsoft Corporation BH-905

headset to the device (see “Pair and connect the headset to a Bluetooth 
device”, p. 9).

If you plug the CA-143U audio cable into the headset when the headset 
is connected to a Bluetooth device, the device is disconnected and 
Bluetooth connectivity is deactivated.

The headset is supplied with the Nokia CA-143U audio cable. The 
headset may also be supplied with adapters to connect the cable to 
different devices. To extend the length of the audio cable, use the CA-
144U extension cable.

To connect the headset to a device that has the Nokia 3.5 mm AV 
connector, plug the audio cable into the headset and the AV connector.

To connect the headset to a device that has a standard 3.5 mm audio 
connector, plug the audio cable into the headset and the AD-63 
adapter, and insert the adapter into the audio connector.

To connect the headset to a device that has the Nokia 2.5 mm AV 
connector, plug the audio cable into the headset and the AD-52 
adapter, and insert the adapter into the AV connector.

To connect the headset to a home stereo system that has a standard 
6.3 mm headphone connector, plug the audio cable into the headset 
and the AD-70 adapter, and insert the adapter into the headphone 
connector.

To connect the headset to an airplane audio system that has a 3.5 mm 
headphone connector, plug the audio cable into the headset and the 
AD-71 adapter, and insert the adapter into the headphone connector.

■ Charge the battery

Before you can connect the headset to a Bluetooth device or use active 
noise cancellation, you must charge the battery.

Before charging the battery, carefully read “Battery and charger 
information”, p. 15.

9216273_en1.fm  Page 7  Tuesday, May 26, 2009  12:02 PM