Справочник Пользователя для Microsoft Corporation CU-13R

When the display is attached to the 
dashboard using the supplied mounting 
plate, you can rotate the display in the 
ball joint up to about 15 degrees left, 
right, up, or down.

Do not try to force the display to rotate 
further.

To adjust the angle of the mounting plate, loosen the screw at one end 
of the hinge on the plate, turn the plate in steps of 45 degrees, and 
tighten the screw.

When you switch on the car kit, 
it enters standby mode. In 
standby mode, the following 
information is displayed when 
the car kit is connected to a 
compatible device:

1. The signal strength of the cellular network at the current location, if 

this information is provided by the connected device; the higher the 
bar, the stronger the signal

2. The name of the service provider, if this information is provided by 

the connected device

3. The battery charge of the connected device, if this information is 

provided by the device; the higher the bar, the more power left. If the 
car kit is connected to two devices, the battery charge is displayed 
for the primary device.

4. The Bluetooth name of the connected device. If the car kit is 

connected to two devices, the primary device is displayed above the 
secondary one.

5. The 

 function that allows you to open the list of menu 

functions. To open the list, press the wheel.

1

2

3

4
5