Справочник Пользователя для Microsoft Corporation CU-13R
G e t s t a r t e d
17
To manually connect the car kit to a device (for example, after
connection loss), make sure the device is switched on, and, in standby
mode, select
connection loss), make sure the device is switched on, and, in standby
mode, select
Menu
>
Settings
>
Connection
>
Connection manager
and
the device.
Connect the car kit automatically
You may be able to set your mobile device so that the car kit connects to
it automatically. To activate this feature, modify the paired device
settings in the Bluetooth menu of your device.
it automatically. To activate this feature, modify the paired device
settings in the Bluetooth menu of your device.
Disconnect the car kit
To disconnect the car kit from your mobile device, close the connection
in the Bluetooth menu of your device. Alternatively, in standby mode,
select
in the Bluetooth menu of your device. Alternatively, in standby mode,
select
Menu
>
Settings
>
Connection
>
Connection manager
and the
device you want to disconnect.
■ Connect the car kit to two devices
You can connect the car kit simultaneously to two compatible Bluetooth
devices by default. To allow the car kit to connect to only one device at a
time, in standby mode, select
devices by default. To allow the car kit to connect to only one device at a
time, in standby mode, select
Menu
>
Settings
>
Connection
>
Multipoint connection
>
off
. If you select
on
, the car kit can be
connected to two devices, and
is displayed.
When you switch on the car kit and it connects to two devices, the first
connected device becomes the primary device and the other device the
secondary device. In standby mode, the name of the primary device is
shown above the secondary one. To set the secondary device as primary
or vice versa, press the switch key.
connected device becomes the primary device and the other device the
secondary device. In standby mode, the name of the primary device is
shown above the secondary one. To set the secondary device as primary
or vice versa, press the switch key.