Справочник Пользователя для Microsoft Corporation HF-310
M o u n t i n a c a r
12
1. Insert the catch on the
mounting device into the
slot at the back of the
speakerphone (1). Rotate
the speakerphone clockwise
until it locks into place (2).
slot at the back of the
speakerphone (1). Rotate
the speakerphone clockwise
until it locks into place (2).
2. Locate a safe mounting
surface on the windscreen,
and clean the surface
thoroughly with a glass
cleaner and a clean towel.
and clean the surface
thoroughly with a glass
cleaner and a clean towel.
If the ambient temperature
is below +15°C (60°F), carefully warm the surface and the suction
cup with a hair dryer to ensure a firm grip on the windscreen. Ensure
that you do not heat the windscreen excessively to avoid damage to
it.
is below +15°C (60°F), carefully warm the surface and the suction
cup with a hair dryer to ensure a firm grip on the windscreen. Ensure
that you do not heat the windscreen excessively to avoid damage to
it.
3. Press the suction cup of the mounting device against the windscreen
(3), and rotate the mounting device clockwise (4) to create a vacuum
between the suction cup and the windscreen. Check that the suction
cup is firmly attached.
between the suction cup and the windscreen. Check that the suction
cup is firmly attached.
4. Turn the speakerphone to the desired position.
To detach the speakerphone from the mounting device, rotate it
anticlockwise.
anticlockwise.
To detach the suction cup from the windscreen, rotate the mounting
device anticlockwise, and pull the strap located on the edge of the
suction cup.
device anticlockwise, and pull the strap located on the edge of the
suction cup.
■ Attach to a dashboard
You can attach the speakerphone to the dashboard using the supplied
mounting device and adhesive pad.
mounting device and adhesive pad.
1. Ensure that the surface where you attach the adhesive pad on the
dashboard is flat, dry, and free from dirt and dust.
HF-310_UG_en1_with_FCC&IC_notice.fm Page 12 Friday, January 9, 2009 2:42 PM