Справочник Пользователя для Microsoft Corporation HS-128W

Скачать
Страница из 11
ENGLISH
(network service) must be activated in 
the phone.
Clear settings or reset
To delete the pairings from the 
headset, switch off the headset, and 
press and hold the power key and the 
answer/end key for about 5 seconds.
To reset the headset if it stops 
functioning, even though it is charged, 
connect the headset to a charger that 
is connected to a wall outlet.
Troubleshooting
If you cannot connect the headset to 
your compatible phone, check that the 
headset is charged, switched on, and 
paired with the phone.
Battery and charger information
This device has an internal, 
nonremovable, rechargeable battery. Do 
not attempt to remove the battery from 
the device as you may damage the 
device. This device is intended for use 
when supplied with power from the 
following chargers: AC-3, AC-4, AC-5, 
and DC-4. The exact charger model 
number may vary depending on the type 
of plug. The plug variant is identified by 
one of the following: E, EB, X, AR, U, A, C, 
or UB. The battery can be charged and 
discharged hundreds of times, but it will 
eventually wear out. Recharge your 
battery only with Nokia approved 
chargers designated for this device. Use 
of an unapproved charger may present a 
risk of fire, explosion, leakage, or other 
hazard.
If a battery is being used for the first time 
or if the battery has not been used for a 
prolonged period, it may be necessary to 
connect the charger, then disconnect and 
reconnect it to begin charging the 
HS-128W_en1_with_FCC&IC_notice.fm  Page 7  Thursday, September 11, 2008  12:55 PM