Справочник Пользователя для Microsoft Corporation HS-21W

3. When the battery is fully charged, the green indicator light is 

displayed. Disconnect the charger from the wall outlet and the 
headset.

The fully charged battery has power for up to 7 hours of talk-time or up 
to 180 hours of standby time. (In the standby mode, the headset is 
switched on but no call is in progress.)

When the battery is running out of power, the headset beeps and the red 
indicator light starts to blink. Charge the battery as described above. 

■ Switching the headset on or off

To switch on: Press and hold the power key for 2 seconds. The headset 
beeps and the green indicator light starts blinking fast. The blinking 
continues slower after the headset is connected to your phone.

To switch off: Press and hold the power key for 2 seconds. The headset 
beeps and the red indicator light is displayed briefly. 

■ Pairing the headset with a compatible phone

1. Make sure that your phone is switched on.

2. Switch on the headset.

3. Enter the Bluetooth menu of your phone and make sure that the 

Bluetooth feature is activated.

4. Enter the submenu where you can set the phone to search for 

Bluetooth devices, and start the search.

5. Select the headset from the list.

6. Enter the passcode 0000 to associate ("pair") and connect the 

headset to your phone.

Once you have entered the passcode, your phone becomes the 
default phone for the headset, if the headset has not been previously 
paired with another phone. See also Using the headset with several 
phones on page 11.

HS-21W_en1_DRAFT_0-2.fm  Page 7  Tuesday, September 28, 2004  3:27 PM