Справочник Пользователя для Microsoft Corporation HS-25W

■ Charge the battery

This device has an internal, non-removable, rechargeable battery. Do 
not attempt to remove the battery from the device as you may damage 
the device.

1. Connect the charger to a wall outlet.

2. Connect the charger cable to the 

headset as shown in the figure. 

The red indicator light is displayed 
during charging. If charging does not 
start, disconnect the charger, plug it in 
again, and retry. Charging the battery fully may take up to 2 hours.

3. When the battery is fully charged, the green indicator light is 

displayed. Disconnect the charger from the wall outlet and the 
headset.

The fully charged battery has power for up to 8 hours of talk-time or up 
to 180 hours of standby time. However, the talk and standby times may 
vary when used with different mobile phones or other compatible 
Bluetooth devices, usage settings, usage styles, and environments.

When the battery is running out of power, the headset beeps, and the 
red indicator light starts to flash.

■ Switch the headset on or off

To switch on, press and hold the power key. The headset beeps, and the 
green indicator light starts to flash. The indicator light turns blue when 
the headset is connected to your phone and ready for use.

To switch off, press and hold the power key. The headset beeps, and the 
red indicator light is displayed briefly. 

■ Pair the headset with a compatible phone

1. Switch on your phone and the headset.

2. Activate the Bluetooth feature on the phone, and set the phone to 

search for Bluetooth devices. See the user guide of your phone for 
instructions.

HS-25W_UG_draft5-5.fm  Page 6  Wednesday, January 25, 2006  3:02 PM