Справочник Пользователя для Microsoft Corporation LD-4W
B a s i c u s e
17
To use the suction cup, press it firmly on a flat surface to
create a vacuum between the cup and surface. Check that
the cup is firmly attached. To detach the cup from the
surface, pull the strap located on the edge of the suction
cup.
create a vacuum between the cup and surface. Check that
the cup is firmly attached. To detach the cup from the
surface, pull the strap located on the edge of the suction
cup.
To detach the suction cup or belt clip from the GPS module,
push the cup or clip through the opening with your thumb,
and carefully pull it from the module.
push the cup or clip through the opening with your thumb,
and carefully pull it from the module.
■ Key ring
The GPS module is supplied
with a key ring. To attach the
key ring, clip it into the
opening on the module.
with a key ring. To attach the
key ring, clip it into the
opening on the module.
■ Clear settings or reset
To clear all the pairing settings from the GPS module, press
and hold the power key (for about 10 seconds) until the
battery charge indicator light alternates red and green.
and hold the power key (for about 10 seconds) until the
battery charge indicator light alternates red and green.
GPS
LD-4W_en1.fm Page 17 Tuesday, June 19, 2007 4:44 PM