Справочник Пользователя для Microsoft Corporation LD-6L

Скачать
Страница из 17
8 
Nokia LD-6L Installation Guide and Safety Information 
 
Connect to power supply 
Option 1: Use Power over Ethernet (PoE) 
The locator supports the use of standard PoE (Power over Ethernet) 
components, e.g. PoE switch or power injector, as its power source. Only 
use standard certified PoE devices. 
When using PoE, a separate DC power supply is not required.  
Option 2: Use separate 12V DC power supply 
If you are not using PoE components, connect the locator to an approved 
DC power supply using the DC connector. Only use compatible power 
supplies. Contact Nokia in case of any uncertainty regarding compatible 
power supplies. 
When the power supply is connected the locator automatically switches 
on. The blue indicator light flashes once, after which the red indicator light 
turns constantly on, until the locator is connected to the HAIP network. 
Connect to HAIP network 
Connect the locator to the HAIP network with Ethernet CAT5 cable using 
the RJ-45 Ethernet socket. For your safety and to prevent any damage to 
the locator, only connect the locator to standard certified network 
components. 
The red indicator light is blinking when the locator is properly connected 
to the HAIP network but not yet configured by the HAIP system. 
Follow the HAIP System User Guide to configure your locator.  
The blue indicator light is on when the locator is locating HAIP tags.