Справочник Пользователя для Microsoft Corporation LD-6T
5
Nokia LD-6T User Guide
Start using the tag
Activate the tag
Before using the tag, you must activate it and configure it for your HAIP
System.
System.
1. Press the reset button to activate the tag
2. Within 30 seconds, send a configuration command to the tag. For
2. Within 30 seconds, send a configuration command to the tag. For
details, see HAIP System User Guide.
Attach the tag to a locatable object
Tie the tag to a locatable object through the mounting holes by using a
cable tie.
cable tie.
WARNING: Never attach the HAIP Tag to hot surfaces.
IMPORTANT: For optimal operation do not attach the
HAIP Tag on top of a large metal surface. Refer to HAIP
System User Guide for further information.
HAIP Tag on top of a large metal surface. Refer to HAIP
System User Guide for further information.
Reset factory settings
To reset factory settings, press and hold the reset button for 10 seconds.