Справочник Пользователя для Microsoft Corporation NHL-9
Nokia
User Guide-FCC DRAFT 10/16/03
Copyright © Nokia 2003
Settings
PIN AND PIN2 CODES (4 TO 8 DIGITS), MODULE PIN, AND SIGNING PIN
The PIN (Personal Identification Number) code protects your SIM card against unauthorized
use. The PIN code is usually supplied with the SIM card. To set the phone to request the PIN
code each time the phone is switched on, see “Security settings” on page 69.
use. The PIN code is usually supplied with the SIM card. To set the phone to request the PIN
code each time the phone is switched on, see “Security settings” on page 69.
The PIN2 code may be supplied with the SIM card and is required to access some functions.
The module PIN is required to access the information in the security module. See “Security
module” on page 93. The module PIN is supplied with the SIM card if the SIM card has a
security module in it.
module” on page 93. The module PIN is supplied with the SIM card if the SIM card has a
security module in it.
The signing PIN is required for the digital signature. See “Digital signature” on page 94. The
signing PIN is supplied with the SIM card if the SIM card has a security module in it.
signing PIN is supplied with the SIM card if the SIM card has a security module in it.
If you key in an incorrect PIN code three times in succession, the phone may display PIM
blocked or PIN code blocked and ask you to key in the PUK code.
blocked or PIN code blocked and ask you to key in the PUK code.
PUK AND PUK2 CODES (8 DIGITS)
The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK2
code is required to change a blocked PIN2 code.
code is required to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact your network operator or service
provider.
provider.
BARRING PASSWORD (4 DIGITS)
The barring password is required when using the Call barring service. You can obtain the
password from your service provider.
password from your service provider.
WALLET CODE (4 TO 10 DIGITS)
The wallet code is required to access the wallet services. If you key in an incorrect wallet
code several times, the wallet application is blocked for five minutes. For further
information, see “Wallet” on page 79.
code several times, the wallet application is blocked for five minutes. For further
information, see “Wallet” on page 79.
• RESTORE FACTORY SETTINGS
To reset the menu settings to their original values, select Menu > Settings > More
settings > Restore factory settings. Key in the security code and select OK.
settings > Restore factory settings. Key in the security code and select OK.
Note: The data you have keyed in or downloaded, for example the names and
phone numbers saved in contacts, are not deleted.
phone numbers saved in contacts, are not deleted.
6820.ENv1_9310322.book Page 71 Wednesday, October 15, 2003 1:43 PM