Справочник Пользователя для Microsoft Corporation RA-4
•
Connection timeout:
— Specify how long RealPlayer waits before reporting a network connection failure. Increase the time
if you frequently receive a time-out error.
•
Server timeout:
— Specify how long RealPlayer waits for a response from the media server before disconnecting.
•
Port range:
— Specify the port range that is used for receiving data.
•
Use proxy:
— Select
Yes
, if your Internet service provider requires that a proxy server is used to connect to the Internet.
•
Host address:
— Enter the proxy server address.
•
Port:
— Enter the port number of the proxy server.
Restore default Internet access points
Your device contains predefined, default Internet access points that are generated automatically when a new SIM card is
inserted into your device for the first time. If you delete these access points, you can restore them with the
inserted into your device for the first time. If you delete these access points, you can restore them with the
Restore default
Internet access points
application.
To restore the predefined Internet access points, select
Connections
→
Restore default Internet access points
, and press
Yes
.
Security
Go to
Desk
→
Tools
→
Control panel
→
Security
.
Device security
You can modify the security settings for the PIN code, automatic locking of the device, and changing of the SIM card. You can
also change the PIN code, PIN2 code, lock code, and restriction password.
also change the PIN code, PIN2 code, lock code, and restriction password.
Avoid using codes that are similar to emergency numbers, such as 112, to prevent accidental dialling of the emergency
number.
number.
Codes are shown as asterisks. When changing a code, enter the current code, and then the new code twice.
Defining device lock settings
Important: In offline profile you cannot make (or receive) any calls, or use other features that require GSM
network coverage. To make any calls, you must first activate the phone function by changing the profile. You may,
however, be able to make an emergency call in offline profile by pressing the power key on the cover of the device
and then entering the official emergency number. This can be done using the cover phone interface only, not the
communicator interface. If the device has been locked, enter the lock code to activate the phone function. When the
device is locked, calls may still be possible to the official emergency number.
network coverage. To make any calls, you must first activate the phone function by changing the profile. You may,
however, be able to make an emergency call in offline profile by pressing the power key on the cover of the device
and then entering the official emergency number. This can be done using the cover phone interface only, not the
communicator interface. If the device has been locked, enter the lock code to activate the phone function. When the
device is locked, calls may still be possible to the official emergency number.
Making an emergency call in offline profile or when the device is locked requires that the device recognizes the
number to be an official emergency number. It may be advisable to change the profile or unlock the device by
entering the lock code before you make the emergency call.
number to be an official emergency number. It may be advisable to change the profile or unlock the device by
entering the lock code before you make the emergency call.
To define device lock settings, select
Security
→
Device security
, and select the
Device lock
page.
Define the following:
•
Autolock period
— You can set a time-out after which the device is automatically locked and can be used only if the correct
lock code is entered. When the device is locked, calls may still be possible to the official emergency number programmed
into your device. You can also answer incoming calls.
into your device. You can also answer incoming calls.
•
Lock code
— Press
Change
to change the lock code. The new code must be 5 to 10 digits long. The preset code is 12345. To
avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from
your device.
your device.
•
Lock if SIM card is changed
— You can set the device to ask for the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that are recognized as the owner's cards.
•
Allow remote locking
— If you set this option to
Yes
, you can lock the device by sending a predefined text message from
another phone.
To create a remote locking message, select
Security
→
Device security
. Set the option
Allow remote locking
to
Yes
, enter your
lock code, and enter text for the remote locking message in the
Message
field. Confirm the message, and press
Done
. The
remote locking message is case-sensitive and can be 5 to 20 characters or digits long. Press
Reboot
to restart the device and
for the changes to take effect.
Tip: If you use a memory card with no password, the memory card will be locked when you lock your device with
the remote locking message. To remove the memory card password, select
the remote locking message. To remove the memory card password, select
Desk
→
Office
→
File manager
, press
Menu, and select
Memory card
→
Security
→
Remove password...
. Enter the remote locking message as your
password, and press
Remove
. If the remote locking message is longer than 8 characters, the first 8 characters of the
message are used as the memory card password.
Defining PIN code settings
To define PIN code settings, select
Security
→
Device security
, and select the
PIN codes
page.
C o n t r o l p a n e l
Copyright © 2005 Nokia. All Rights Reserved.
71