Справочник Пользователя для Microsoft Corporation RM-2
G e t t i n g s t a r t e d
18
■ Charging the battery
1. Connect the lead from the
charger to the socket on
the bottom of your phone.
the bottom of your phone.
2. Connect the charger to an
AC wall socket.
The text
Charging
is
displayed briefly if the
phone is switched on. If the battery is completely flat, it may take a
few minutes before the charging indicator appears on the display or
before any calls can be made.
phone is switched on. If the battery is completely flat, it may take a
few minutes before the charging indicator appears on the display or
before any calls can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For
example, charging a BLC-2 battery with the ACP-12 charger takes about
1 hour and 30 minutes while the phone is in standby mode.
example, charging a BLC-2 battery with the ACP-12 charger takes about
1 hour and 30 minutes while the phone is in standby mode.
■ Switching the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
prohibited or when it may cause interference or danger.
Press and hold the power key
.
• If the phone requests a PIN code or a security
code, key in the code, and press
OK
.
See also Security settings on page 92 and
General information on page 13.
General information on page 13.
• If the phone displays
Insert SIM card
even
though the SIM card is properly inserted, or
SIM card not supported
, contact your network
operator or service provider. Your phone does not support 5-Volt SIM
cards and the card may need to be changed.
cards and the card may need to be changed.
rm-2_en1_FCC.fm Page 18 Monday, February 16, 2004 8:14 AM