Справочник Пользователя для Microsoft Corporation RM-2

• Save the EGPRS settings for each of the applications used over 

EGPRS.

For information on pricing, contact your network operator or service 
provider.

Note that when you have selected GPRS as a data bearer, the phone uses 
EGPRS instead of GPRS if this is available in the network. You cannot 
choose between EGPRS and GPRS but for some applications you may be 
able to select either GPRS or 

 (CSD, Circuit Switched Data).

Press 

 and select 

, 

, 

 and 

.

• Select 

 to set the phone to automatically register to an 

EGPRS network when you switch the phone on. When the GPRS 
connection is established, the indicator 

 is shown on the top left of 

the display.

When you start an application using EGPRS, the connection between 
the phone and the network is established, and data transfer is 
possible. When you end the application, the EGPRS connection is 
ended but the registration with the EGPRS network remains.

If you receive a call or a text message, or make a call during a GPRS 
connection, the indicator 

 will be shown on the top right of the 

display to indicate that the EGPRS connection has been suspended 
(put on hold).

The GPRS and EGPRS connections are indicated by the same 
indicators.

• If you select 

, the EGPRS registration and connection 

are established when required by an application using GPRS and 
closed when you end the application.

Note that your phone supports three simultaneous EGPRS connections. 
For example, depending on the network, you can simultaneously browse 
xHTML pages, receive multimedia messages and have an ongoing PC 
dial-up connection.

rm-2_en1_FCC.fm  Page 88  Monday, February 16, 2004  8:14 AM