Справочник Пользователя для Microsoft Corporation RM-2

■ Radio (Menu 6)

Note: Your phone must be switched on to use this 
function. Do not switch the phone on when wireless phone use is 
prohibited or when it may cause interference or danger.

To listen to the radio on your phone, connect the compatible headset to 
the headset connector on the bottom of the phone. The lead of the 
headset functions as the radio antenna, so let it hang freely.

Note that the quality of the radio broadcast depends on the radio 
station’s coverage in that particular area.

1. To turn on the radio, press 

 and select 

. The following are 

shown on the display:

• The channel location number and the name of the radio channel, 

if you have previously saved it.

• The frequency of the radio channel.

2. If you have pre-saved radio channels, you can scroll to the channel 

that you would like to listen to, or select a radio channel location 
from 1 to 9 by pressing the corresponding number key.

When using the compatible headset, press the headset key to scroll 
to the desired radio channel that you have saved.

3. When the radio is on, press 

 and select 

 to turn off 

the radio.

Tip: To return to standby mode, press 

 briefly; to quickly turn 

off the radio, press and hold 

. 

When the radio is on, move the joystick up or down to start the channel 
search. Searching stops when a channel has been found. To save the 
channel, press 

 and select 

. Key in the name of the 

channel and press 

. Select the location to which you want to save the 

channel.

Tip: To quickly save the channel in locations 1 to 9, press and hold 
the corresponding number key, then key in the name of the 
channel and press 

.

rm-2_en1_FCC.fm  Page 96  Monday, February 16, 2004  8:14 AM