Справочник Пользователя для Microsoft Corporation RM-357
4. Close the cover.
Eject the memory card
Important: Do not remove the memory card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
1. Press the power key briefly, and select
Remove
memory card
.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from
the memory card slot.
4. Close the cover.
Connect the headset
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
headset where it can endanger your safety.
Connect the compatible headset to the headset
connector of your device.
connector of your device.
Attach the wrist strap
Thread the wrist strap as shown, and
tighten it.
tighten it.
Antennas
Your device may have internal and external antennas.
As with any radio transmitting device, avoid touching
the antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an
antenna affects the communication quality and may
cause the device to operate at a higher power level
than otherwise needed and may reduce the battery
life.
As with any radio transmitting device, avoid touching
the antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an
antenna affects the communication quality and may
cause the device to operate at a higher power level
than otherwise needed and may reduce the battery
life.
14
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black