Справочник Пользователя для Microsoft Corporation RM-420
ವ
Connection name
— Enter a descriptive name
for the connection.
ವ
Data bearer
— Select
Wireless LAN
.
ವ
WLAN network name
— To enter the service
set identifier (SSID), that is, the name that
identifies the specific WLAN, select
identifies the specific WLAN, select
Enter
manually
. To select the network from the
WLANs in range, select
Search for networks
.
ವ
Network status
— Select
Hidden
if the network
you are connecting to is hidden or
Public
if it is
not hidden.
ವ
WLAN network mode
— If you select
Infrastructure
, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select
a WLAN access point. If you select
Ad-hoc
,
devices can send and receive data directly with
each other, and no WLAN access point is needed.
each other, and no WLAN access point is needed.
ವ
WLAN security mode
— You must select the
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings. See the device help for more
information.
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings. See the device help for more
information.
ವ
WLAN security settings
— Edit the security
settings for the selected security mode.
ವ
Homepage
— Enter the web address of the page
you want to display as the home page when you
use this access point.
use this access point.
To set up a WLAN access point automatically, use the
WLAN wizard. Select
WLAN wizard. Select
Menu
Connectivity
WLAN
wiz.
.
Advanced access point
settings for WLAN
settings for WLAN
Select
Menu
Tools
Settings
Connection
Access points
.
After setting up a basic access point for WLAN, select
Options
Advanced settings
, and define the
following advanced settings:
ವ
IPv4 settings
— Enter the device IP and name
server addresses for the IPv4 internet protocol.
ವ
IPv6 settings
— Select or enter the name server
addresses for the IPv6 internet protocol.
ವ
Ad-hoc channel
— The channel is usually chosen
automatically. To enter the channel number (1-11)
manually, select
manually, select
User defined
.
ವ
Proxy server address
— Enter the proxy server
address.
ವ
Proxy port number
— Enter the proxy server port
number.
Connect PC to web
You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of
your device and your PC.
2. Select
Connect PC to Net
. The necessary Windows
software is installed to your PC.
3. Accept the installation in your PC. If asked, accept
also the connection. When the connection between
your device and PC is established, the internet
browser of your PC opens.
your device and PC is established, the internet
browser of your PC opens.
53
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black