Справочник Пользователя для Microsoft Corporation RM-450

Charge the battery

1. Connect a compatible charger to a wall outlet.

2. Connect the charger to the device. If the battery is

completely discharged, it may take a while before the
charging indicator starts scrolling.

3. When the battery is fully charged, disconnect the

charger from the device, then from the wall outlet.

Your battery has been precharged at the factory, but the
charging levels may vary. To reach the full operation time,
charge the battery until it has been fully charged according
to the battery level indicator.

Tip: You can use older style Nokia chargers with
your device by attaching the CA-44 adapter to the
old charger. The adapter is available as a separate
enhancement.

Insert the memory card

The sales package of your device may not include a
memory card. Memory cards are available as separate
accessories.

1. Open the cover of the memory card slot.

2. Insert the memory card in the slot with the contact

area first. Ensure the contact area is facing the
connectors on the device.

3. Push the card in until it locks into place.

4. Close the cover.

Eject the memory card

Important: Do not remove the memory card in the

middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.

1. Press the power key briefly, and select

Remove

memory card

2. Open the cover of the memory card slot.

3. Press the end of the memory card to release it from the

memory card slot.

4. Close the cover.

Set up your device

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black