Справочник Пользователя для Microsoft Corporation RM-450

ವ

  — Select 

 if the network

you are connecting to is hidden or 

 if it is not

hidden.

ವ

  — If you select

, devices can communicate with

each other and with wired LAN devices through a
WLAN access point. If you select 

, devices can

send and receive data directly with each other, and
no WLAN access point is needed.

ವ

  — You must select the same

security mode that is used in the WLAN access point.
If you select WEP (wired equivalent privacy), 802.1x,
or WPA/WPA2 (Wi-Fi protected access), you must
also configure the relevant additional settings.

ವ

  — Edit the security

settings for the selected security mode.

ವ

  — Enter the web address of the page

you want to display as the home page when you use
this access point.

To set up a WLAN access point automatically, use the WLAN
wizard. Select 

.

Select 

.

After setting up a basic access point for WLAN, select

, and define the following

advanced settings:

ವ

 — Enter the device IP and name server

addresses for the IPv4 internet protocol.

ವ

 — Select or enter the name server

addresses for the IPv6 internet protocol.

ವ

 — The channel is usually chosen

automatically. To enter the channel number (1-11)
manually, select 

.

ವ

 — Enter the proxy server

address.

ವ

 — Enter the proxy server port

number.

You can use your device to connect your PC to the web.

1. Connect the data cable to the USB connectors of your

device and your PC.

2. Select 

. The necessary software is

automatically installed from your device to the PC.

3. Accept the installation in your PC. If asked, accept also

the connection. When the connection to the web is
established, the web browser of your PC opens.

You must have administrator rights to your PC, and the
autorun option enabled in the PC. If not, run the setup.exe
file from the CD-ROM drive of your PC.

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black