Справочник Пользователя для Microsoft Corporation RM-530X

To switch on the device:
1. Press and hold the power key.
2. If the device asks for a PIN code or lock code,

enter it, and select 

. The preset lock code

is 12345. If you forget the code and your

device is locked, your device will require

service and additional charges may apply. For

more information, contact a Nokia Care point or your

device dealer.

To switch off the device, press the power key briefly, and

select 

.

Your battery has been partially charged at the factory. If

the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger plug to the device.

3. When the device indicates a full charge, disconnect the

charger from the device, then from the wall outlet.

You do not need to charge the battery for a specific length

of time, and you can use the device while it is charging. If

the battery is completely discharged, it may take several

minutes before the charging indicator appears on the

display or before any calls can be made.

Charging with the USB data cable is slower than charging

with the charger. Charging with the USB data cable may

not work if you use a USB hub. USB hubs may be

incompatible for charging a USB device.
When the USB data cable is connected, you can transfer

data at the same time as charging.
1. Connect a compatible USB device to your device using

a compatible USB data cable.
Depending on the type of the device that is used for

charging, it may take a while for charging to start.

2. If the device is switched on, select from the available

USB modes.

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

2009-06-25 13:13:44 P3657 user guide publication 3