Справочник Пользователя для Microsoft Corporation RM-530X

Select 

 > 

 > 

 and 

 >

 > 

, and follow the instructions

on the display. Or, open one of the access point groups,

select an access point marked with  , and select 

.

Use the instructions provided by your service provider to

edit the following:
•

  — Select 

 or

. If you select an existing network,

 and 

 are

determined by the settings of its access point device.

•

  — Define whether the network name

is displayed.

•

  — Select 

 to create an

ad hoc network, and to allow devices to send and

receive data directly; a WLAN access point device is not

needed. In an ad hoc network, all devices must use the

same WLAN network name.

•

  — Select the encryption used:

, 

, or 

. (802.1x and WPA/WPA2

are not available for ad hoc networks.) If you select

, no encryption is used. The WEP, 802.1x,

and WPA functions can be used only if the network

supports them.

•

  — Select 

 to set

the device to ask for confirmation before the

connection using this access point is created or

 to set the device to connect to the

destination using this access point automatically.

To enter the settings for the selected security mode, select

.

Select 

 > 

 and from the

following:
•

  — Enter the IP address of your device,

the subnet IP address, the default gateway, and the IP

addresses of the primary and secondary DNS servers.

Contact your internet service provider for these

addresses.

•

  — Define the type of DNS address.

•

 (only for ad hoc networks)  — To enter

a channel number (1-11) manually, select 

.

•

  — Enter the address for the

proxy server.

•

  — Enter the proxy port number.

Select 

 > 

 > 

 and 

 >

.

Your device supports packet data connections, such as

GPRS in the GSM network. When you are using your device

in GSM and UMTS networks, it is possible to have multiple

data connections active at the same time; access points

can share a data connection, and data connections remain

active, for example, during voice calls.
To define the packet data settings, select 

 and 

 to register the device to

the packet data network when you switch the device on

in a supported network, or 

 to register the

device to a packet data network only when an application

or action attempts to establish a packet data connection.

This setting affects all access points for packet data

connections. To use the device as a packet data modem

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

2009-06-25 13:13:44 P3657 user guide publication 3