Справочник Пользователя для Microsoft Corporation RM-547

Select 

 > 

Settings > Settings and Applications.

Select an application from the list to adjust its settings.

Select 

 > 

Settings > Settings > General > Security.

To change the PIN code, select Phone and SIM card > PIN

code. The new code must be 4 to 8 digits long. The PIN code

protects your SIM card against unauthorised use and is

provided with the SIM card. After three consecutive incorrect

PIN code entries, the code is blocked, and you need to use the

PUK code to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period,

select Phone and SIM card > Keypad autolock period.
To set a time-out period after which the device is

automatically locked and can be used only if the correct lock

code is entered, select Phone and SIM card > Phone

autolock period. Enter the length of the time-out period in

minutes, or select None to deactiveate the autolock feature.

When the device is locked, you can still answer incoming calls,

and calls may still be possible to the official emergency

number programmed into your device.
To change the lock code, select Phone and SIM card > Lock

code. The default lock code is 12345. Enter the current code

and then the new code twice. The new code must be 4-255

characters long. Alphanumeric (uppercase and lowercase)

characters can be used. The device notifies you if the lock

code is not properly formatted.

Select 

 > 

Settings > Settings and General >

Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an

accessory to your device, select the accessory and Default

profile.
To set the device to answer phone calls automatically after 5

seconds when an accessory is attached, select Automatic

answer > On. If the ringing type is set to Beep once or

Silent in the selected profile, automatic answering is

disabled.
To illuminate the device while it is attached to an accessory,

select Lights > On.

To restore the original device settings, select 

 >

Settings > Settings and General > Factory settings. To

do this, you need your device lock code. After resetting, the

device may take a longer time to switch on. Documents,

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

2009-05-14 14:18:16 RM547-RM566 User guide publication 2