Справочник Пользователя для Microsoft Corporation RM-566

With USB charging, you can also transfer data with the USB

data cable while charging the device.
1. Connect a compatible USB device to your device using a

compatible USB data cable.
Depending on the type of the device that is used for

charging, it may take a while for charging to start.

2. If the device is switched on, select from the available USB

mode options on the display of the device.

Press and hold the power key to

switch the device on and off.

Press the power key briefly to

end a call or close an

application.
If the device asks for a PIN code,

enter the PIN code, and select

OK.
If the device asks for the lock

code, enter the lock code, and

select OK. The factory setting

for the lock code is 12345.
To set the correct time zone,

time, and date, select the

country you are presently in, then enter the local time and

date.

Your device may have internal and external antennas. As with

any radio transmitting device, avoid touching the antenna

area unnecessarily while the antenna is transmitting or

receiving. Contact with such an antenna affects the

communication quality and may cause the device to operate

at a higher power level than otherwise needed and may

reduce the battery life.

Before you can use multimedia messaging, e-mail,

synchronisation, streaming, and the browser, you must have

the proper configuration settings in your device. Your device

may automatically configure browser, multimedia

messaging, access point, and streaming settings based on

the SIM card used. If not, you can use the Settings wizard

application to configure the settings. You may receive the

settings as a configuration message that you can save to your

device. For more information on availability, contact your

service provider or nearest authorised Nokia dealer.

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black

2009-05-14 14:25:48 RM547-RM566 User guide publication 2