Справочник Пользователя для Microsoft Corporation RM-600

1. Connect a compatible charger to a wall outlet.
2. Connect the charger to the device. If the battery is

completely discharged, it may take a while before

the charging indicator starts scrolling.

3. When the battery is fully charged, disconnect the

charger from the device, then from the wall outlet.

Your battery has been precharged at the factory, but

the charging levels may vary. To reach the full

operation time, charge the battery until it has been

fully charged according to the battery level indicator.

Tip: You can use older style Nokia chargers with

your device by attaching the CA-44 adapter to

the old charger. The adapter is available as a

separate enhancement.

The sales package of your device may not include a

memory card. Memory cards are available as separate

accessories.
1. Open the cover of the memory card slot.

2. Insert the memory card in the slot with the contact

area first. Ensure the contact area is facing the

connectors on the device.

3. Push the card in until it locks into place.
4. Close the cover.

Important:  Do not remove the memory card

during an operation when the card is being accessed.

Doing so may damage the memory card and the device,

and corrupt data stored on the card.
1. Press the power key briefly, and select 

.

2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from

the memory card slot.

4. Close the cover.

Cyan

Cyan

Magenta

Magenta

Yellow

Yellow

Black

Black