Справочник Пользователя для Microsoft Corporation RM-624
3 When
Remove memory card and
press 'OK'
is displayed, open the
memory card slot cover.
4 To release the memory card from the
slot, push it in slightly.
5 Pull out the memory card. If the device
is switched on, select
OK
.
6 Close the memory card slot cover.
Antenna locations
Your device may have internal and
external antennas. Avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Contact with antennas affects the
communication quality and may cause a
higher power level during operation and
may reduce the battery life.
Switch the device on or off
Switch the device on
1 Press and hold the power key.
2 If prompted, enter a PIN code or lock
code, and select
OK
. The preset lock
code is 12345. If you forget the code
and your device is locked, your device
will require service and additional
charges may apply. For more
information, contact a Nokia Care
point or your device dealer.
Switch the device off
Press the power key briefly, and select
Switch off!
.
Charge the battery
Your battery has been partially charged at
the factory. If the device indicates a low
charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the device indicates a full
charge, disconnect the charger from
the device, then from the wall outlet.
You do not need to charge the battery for
a specific length of time, and you can use
the device while it is charging. If the
www.nokia.com/support
15
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black