Справочник Пользователя для Microsoft Corporation SU1B

• Plug the charger into an AC wall outlet, connect it to the 

Connectivity Stand, and place the pen in the stand.

The battery indicator on the pen blinks during charging. Charging the 
battery fully takes up to 2 hours depending on the charger. Note that 
the pen need not be fully charged before you can use it. 

Check the model number of any charger before using it with this device. The 
Nokia Digital Pen is intended for use with the following chargers: ACP-8, ACP-12, 
and LCH-12. 

Warning! Use only chargers approved by Nokia for use with this 
particular enhancement. The use of any other types will invalidate any 
approval or warranty applying to the enhancement, and may be 
dangerous.

For availability of approved chargers, check with your local dealer.

When you disconnect the power cord of any enhancement, grasp and pull the 
plug, not the cord.

■ Pairing your Nokia Digital Pen

You must pair the pen with a compatible phone to enable it to 
communicate with the phone. You can start the pairing from either your 
phone or from your pen. The pen can be paired with one phone at a time. 
If you want to use your pen with another phone, you must pair it with 
that phone.

Note: Do not point the IR (infrared) beam at anyone's eye or allow it to 
interfere with other IR devices. 

1. Take the cap off the pen and make sure that both your pen and 

compatible phone are switched on. Create the Bluetooth connection 
within 5 minutes. 

2. Activate the Bluetooth connection from the phone. For more 

information, see the user’s guide of the phone.

3. Set the phone to search for Bluetooth devices as instructed in the 

user’s guide of the phone.

SU-1B_en_1.fm  Page 6  Friday, September 19, 2003  2:46 PM