Справочник Пользователя для Microsoft Corporation WE02M

■ Charge the battery

This device has an internal, nonremovable, rechargeable battery. Do not 
attempt to remove the battery from the device as you may damage the 
device.

1. Connect the charger to a wall outlet.

2. Connect the charger cable to the headset.

The red indicator light is displayed during 
charging. If charging does not start, 
disconnect the charger, plug it in again, 
and retry. Charging the battery fully may 
take up to 2 hours.

When the battery is fully charged, the red indicator light turns off.

3. Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 6 hours of talk-time or up 
to 160 hours of standby time. However, the talk and standby times may 
vary when used with different mobile phones or other compatible 
Bluetooth devices, usage settings, usage styles, and environments.

When battery power is low, the headset beeps, and the red indicator 
light starts to flash.

■ Switch the headset on or off

To switch on, press and hold the power key. The headset beeps, and the 
green indicator light is displayed briefly. When the headset is connected 
to a paired phone and is ready for use, the blue indicator light flashes 
slowly. If the headset is not connected to a phone, the green indicator 
light flashes slowly.

To switch off, press and hold the power key. The headset beeps, and the 
red indicator light is displayed briefly. 

■ Pair the headset with a compatible phone

1. Switch on your phone and the headset.

HS-64W_en1.fm  Page 6  Wednesday, June 14, 2006  1:13 PM