Справочник Пользователя для Microsoft Corporation WE03M

1. When the back of the headset is facing you, detach the earloop from 

the left of the headset (see Place the headset on the ear on page 9).

2. Connect the charger to a wall outlet.

3. Connect the charger cable to the 

headset.

The red indicator light is displayed 
during charging. If charging does 
not start, disconnect the charger, 
plug it in again, and retry. Charging 
the battery fully may take up to 2 
hours.

4. When the battery is fully charged, the red indicator light turns off. 

Disconnect the charger from the wall outlet and the headset.

The fully charged battery has power for up to 5 hours and 30 minutes of 
talk-time or up to 150 hours of standby time. However, the talk and 
standby times may vary when used with different mobile phones or 
other compatible Bluetooth devices, usage settings, usage styles, and 
environments.

When the battery is running out of power, the headset beeps, and the 
red indicator light starts to flash.

■ Switch the headset on or off

To switch on, press and hold the power key. The headset beeps, and the 
green indicator light starts to flash quickly. When the headset is 
connected to a paired phone and is ready for use, the green indicator 
light flashes slowly.

To switch off, press and hold the power key. The headset beeps, and the 
red indicator light is displayed briefly. 

■ Pair the headset with a compatible phone

Before you can use the headset with your phone, you need to pair and 
connect the headset with it.

1. Switch on your phone and the headset.

HS-50W_en1_draft6.fm  Page 6  Tuesday, April 4, 2006  12:15 PM