Справочник Пользователя для Denso Wave BHT1200QU
Step 1 Charging
The battery is not charged when purchased and must therefore be charged prior to use.
The following Cradle can be used with the BHT.
The following Cradle can be used with the BHT.
Cradle: CU-1211, CU-1233
It takes about 9 hours to charge the batteries (when both the batteries in the BHT main body and
in the grip are mounted).
in the grip are mounted).
・
It takes about 4.5 hours when the battery is mounted only in the BHT main body.
・
If a battery of which discharge amount is small is used, it takes less time to complete charging.
■Charging with the BHT
Place the BHT on the Cradle.*
The LED illuminates in red and charging begins.
The BHT Indicator LED will change to green when
charging is complete.
Place the BHT on the Cradle.*
The LED illuminates in red and charging begins.
The BHT Indicator LED will change to green when
charging is complete.
Plugging in the BHT into the CU: Slide the BHT
gently into the CU. Make sure that it is placed
along the guides and not tilted or twisted. If the
BHT does not easily fit into the CU, please
take it out, check the CU and the BHT for
interfering obstacles and try again. Never use
any force to attach the BHT into the CU.
gently into the CU. Make sure that it is placed
along the guides and not tilted or twisted. If the
BHT does not easily fit into the CU, please
take it out, check the CU and the BHT for
interfering obstacles and try again. Never use
any force to attach the BHT into the CU.
Indicator LED
Spare battery charging slot
Cradle
* Refer to “How to Replace the Battery” for how to insert the battery into the BHT main body.