Справочник Пользователя для Denso Wave BHT300WB
9
Components and Functions
Liquid crystal display (LCD)
Shows the characters and graphic patterns.
Shows the characters and graphic patterns.
Indication LED
Illuminates in green when the BHT has successfully read a 2D code or bar code.
Illuminates in green when the BHT has successfully read a 2D code or bar code.
Trigger switch (M4 key)
Press this switch to start code reading.
Press this switch to start code reading.
Trigger switch
(M3 key)
Press this switch to start code
Press this switch to start code
reading.
IrDA interface port
Used to exchange data/programs
Used to exchange data/programs
with the host computer via its
integrated IR port or via the optical
communication unit CU-300.
Hand strap
Be sure to put your hand
Be sure to put your hand
through this strap to
prevent you from dropping
the BHT accidentally.
Reading window
Battery cover lock
Use this lock to lock/unlock the battery
cover.
Use this lock to lock/unlock the battery
cover.
Battery cover
Remove this cover to replace the
Remove this cover to replace the
battery cartridge.
Built-in antenna
Do not cover this antenna
section with metal-evaporated
tape or by hand.
Doing so may result in
communications failures.
section with metal-evaporated
tape or by hand.
Doing so may result in
communications failures.
Connector cover
Inside this cover is the direct-connect
interface port.
Inside this cover is the direct-connect
interface port.