Справочник Пользователя для Denso Wave DWWL001
29
Connecting to the power supply
(1) Connect the output plug of the AC adapter into the power inlet connector of the CU/CH.
(2) Connect the AC adapter to a wall socket.
Note: The above diagram is that of the CH-851.
Power inlet connector
Plug the AC adapter into this connector.
Without using the AC adapter, the CU-821
can work if the power (5V, 500 mA) is
supplied via the USB.
Without using the AC adapter, the CU-821
can work if the power (5V, 500 mA) is
supplied via the USB.
CU-801, CU-811, CU-821, CH-851
AC adapter
Handy Terminal "BHT-800" will be supplied with this AC adaptor.
As you can see in the drawing below, this AC adaptor has Standard Ferrite Core.
As you can see in the drawing below, this AC adaptor has Standard Ferrite Core.