Справочник Пользователя для Denso Wave UR21MX
3
Thank you for using the DENSO WAVE’s products.
SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
WARNING
Alerts you to those conditions which could cause serious bodily injury or death
if the instructions are not followed correctly.
Handling the Scanner
Wrong handling of the product against these warning precautions could cause electric shock, impaired skin, injury or burn or will
cause the product to generate heat or smoke. Be sure to observe the following when using this product.
•
Do not use the product in places where use of radio waves is restricted, such as on airplanes or in
hospitals. Doing so could case malfunction in electronic devices or medical equipment.
•
Never put the product into a microwave oven or high-pressure container.
•
If you drop the product so as to damage its housing, immediately turn off the power.
•
Never put the product in places where there are excessively high temperatures, such as inside
closed-up automobiles, in places exposed to direct sunlight, or in places generating heat
accumulation caused by radiant, etc.
•
Avoid using the product in extremely humid, dusty areas or, where there are drastic temperature
changes.
•
Use the dedicated AC adapter only.
•
If foreign material or water gets into the product, immediately remove the cable. Failure to do so
could cause fire or electrical shock.
•
If smoke, abnormal odors or noises come from the product, unplug the AC adapter from the
electrical outlet and contact your nearest dealer.
Effect on implantable medical device
•
This product is a reader/writer of RFID devices using electric waves. Medical device may be affected
by RFID device in some applications/places. Observe the following precautions to reduce the effect
for implementing RFID. Those wearing an active implantable medical device (AIMD) are required to
stay at least 22 cm away from the antenna part of RFID device.
To System Designers
•
When introducing the product in those systems that could affect human lives (e.g., medicines
management system), develop applications carefully through redundancy and safety design which
avoids the feasibility of affecting human lives even if a data error occurs.
CAUTION
Alerts you to those conditions which could cause minor bodily injury or
substantial property damage if the instructions are not followed correctly.
Handling the Scanner and AC adapter
•
Do not use the product in the vicinity of wireless devices such as ham radios. This could cause
malfunction of the product.
•
In environments where static electricity can build into significant charges, do not operate the product.
Doing so will result in malfunction or machine failure.
•
Do not drop the product on the floor or apply strong shock to it. Doing so could cause malfunction of
the product.
•
Do not touch the product with wet hands.
•
Hot plugging/unplugging is not allowed for the connector. Doing so could result in electrical shock,
malfunction, or failure.
•
Use the dedicated antenna only.
•
Do not apply excessive force when inserting or removing the AC adapter. Doing so will result in
damage, electrical shock, malfunction, or failure.
Manuals and other instructions are available from our QBdirect online information service at:
http://www.qbdirect.net/