Справочник Пользователя для AeroScout TAGP1000

P-1000 PENDANT TAG  

User Guide    

6 

The P-1000 Bi-directional Tag firmware contains pre-defined 
sets of parameters. Each parameter set is called a static 
configuration and has a unique number. Static configurations 
cannot be edited. Only one (1) configuration can be selected 
and used for the Tag. 

P-1000 Tags must be initially configured using the TMBD 
application (Tag Manager Bi-Directional application) before 
use. The TMBD application allows you to activate and configure 
the Tags according to your sites infrastructure. 

Once the Tags have been initially configured using the TMBD 
application, future configurations can then be done via 
MobileView.  

For more details on configuring and updating the Tags, see the 
Tag Manager BD User Guide. 

MobileView supports the option to update the P-1000 Tag 
configuration and firmware over the air (wirelessly). A group 
of Tags or Tags associated to a specific category can be 
configured simultaneously.  

For more details see the Tag Manager BD User Guide. 

P-1000 Tags include a dual-color LED (red and green) for 
visual indications. These indications are described in the 
table below. 

The following symbols are used: 



  Long blink 



  Short blink 



  Quick flash 

Button Presses 

Short Press 

1 short green blink ( 

- 

) 

Long Press 

1 long green blink (

) 

Double Press 

2 short green blinks ( 

-  

- 

)