Справочник Пользователя для Schulte-Schlagbaum AG SOT01
SAG
SAFE-O-TRONIC
Installation
Schulte-Schlagbaum AG
Page 7 of 12
SOT-Manual.DOC
4. Installation
Installing:
The electronic cabinet lock SAFE-O-TRONIC is attached on the inside of a cabinet door
using four screws.
Testing:
After installing, check the function of the SAFE-O-TRONIC using the TestKey.
Applying the reference plate:
Stick the user reference plate only to a flat, grease- and dust-free surface.
Configuring:
Once the installation work is complete and all the locks tested, they are configured using
the SetupKey.
the SetupKey.
5. Commissioning
5.1. Function testing with the "TestKey"
Lock SAFE-O-TRONIC :
1. Activate SAFE-O-TRONIC (push rotary knob)
2. Hold TestKey directly in front of the rotary knob.
2. Hold TestKey directly in front of the rotary knob.
3. When the green LED flashes, turn knob 90
°
.
Unlock the SAFE-O-TRONIC :
1. Activate SAFE-O-TRONIC (push rotary knob)
2 Hold TestKey directly in front of the rotary knob.
3. SAFE-O-TRONIC unlocks itself.
3. SAFE-O-TRONIC unlocks itself.
NOTE:
The TestKey is used to test the function of factory-new or non-configured SAFE-O-
TRONIC . Once the SetupKey has been used to configure the SAFE-O-TRONIC for
the system, the SAFE-O-TRONIC can no longer be locked or unlocked using the
TestKey!