Справочник Пользователя для CipherLab Co. Ltd. 1560P
87
Update
Chapter 2
Selecting Output Interface
2.5.7 INTER-CHARACTER DELAY
By default, the inter-character delay is zero. Specify a value, ranging from 0 to 254 in
units of millisecond, to match the computer response time. Such delay time is inserted
between every character being transmitted. The longer the delay time is, the slower the
transmission speed will be.
units of millisecond, to match the computer response time. Such delay time is inserted
between every character being transmitted. The longer the delay time is, the slower the
transmission speed will be.
Inter-Character
Delay… (*0~254)
Delay… (*0~254)
1)
Read the barcode above to specify the inter-character delay.
2)
Read the “
Decimal Value
” barcode on page 231 for the desired inter-character delay
(millisecond).
3)
Read the “Validate” barcode on the same page to complete this setting.
2.5.8 INTER-FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
Inter-Function
Delay… (*0~254)
1)
Read this barcode above to specify the inter-function delay.
2)
Read the “
Decimal Value
” barcode on page 231 for the desired inter-function delay
(millisecond).
3)
Read the “Validate” barcode on the same page to complete this setting.