Справочник Пользователя для CipherLab Co. Ltd. 1560P
159
Update
You may configure in which format the collected data will be output to the host computer.
Barcode read by the scanner will be processed in the following sequence –
Barcode read by the scanner will be processed in the following sequence –
1)
Perform character substitution on the data scanned.
2)
Add
Code ID
and
Length Code
to the front of the data:
[Code ID][Length Code][Data]
3)
Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to
Chapter 6 Applying Formats for Data Editing
.
4)
Add
Prefix Code
and
Suffix Code
before transmission:
[Prefix Code][Processed
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case .............................................................. 159
5.2 Character Substitution ............................................... 160
5.3 Prefix/Suffix Code ..................................................... 168
5.4 Code ID ................................................................... 169
5.5 Length Code ............................................................. 173
5.6 Multi-Barcode Editor .................................................. 177
5.7 Removal of Special Character ..................................... 180
5.2 Character Substitution ............................................... 160
5.3 Prefix/Suffix Code ..................................................... 168
5.4 Code ID ................................................................... 169
5.5 Length Code ............................................................. 173
5.6 Multi-Barcode Editor .................................................. 177
5.7 Removal of Special Character ..................................... 180
5.1 LETTER CASE
By default, the alphabets transmission is case-sensitive, meaning that the alphabets will
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
*Normal
Upper Case
Lower Case
Chapter 5
DEFINING OUTPUT FORMAT