Справочник Пользователя для CipherLab Co. Ltd. 1664

 

 

167

 

Update 

 

Chapter 5

    錯誤!  使用  [常用]  索引標籤將 Heading 1 套用到您想要在此處顯示的文字。

 

5.2.1 SELECT A SET FOR CHARACTER SUBSTITUION 

 

1)  Read the barcode above to enable character substitution by set.   

For example, have the scanner read the “Set 1” barcode to configure the first set of 

character substitution. The scanner will respond with one short beep, high tone, to 
indicate more setup barcodes are required. 

2)  Read the “

Hexadecimal Value

” barcode on page 252 for the desired character 

substitution. For example,   

KEY TYPE = NORMAL 

 

Read “3”, “0”, “2”, and “D” to replace the character “0” with a dash “-”. 

 

Read “3”, “0”, “2”, “D”, “3”, and “0” to replace the character “0” with a dash “-0”. 

KEY TYPE = SCAN CODE 

If you want to replace the character “0” with “a” (= “1C” on the scan code table): 

1.  Read “3” and “0”. 

2.  Read the “Scan Code” barcode. 

3.  Read “1” and “C”. 

KEY TYPE = NORMAL + KEY STATUS = SHIFT 

If you want to replace the character “0” with “!” (= “Shift” + “1” on keyboard): 

1.  Read “3” and “0”. 

2.  Read the “Add Shift” barcode. 

3.  Read “3” and “1”. 

3)  Read the “Validate” barcode to complete this setting. (The defined set or sets will be 

applied to all symbologies by default.)