Справочник Пользователя для ERG Transit Systems MCROEM
Device Product Group
Security Level 3
MCROEM User Manual
DPG-00604
ERG Confidential © ERG 2005
Page 16 of 20
Revision 1.0 / 11 October 2005
Figure 6: Typical physical envelope
5.1.2 Mounting
Holes
All mounting holes are M3.2. The mounting holes are aligned and may be used with screws
and plastic spacers to secure the MCR inside the product. The 100 mm cable allows the
Control Board and Antenna Board to be separated to accommodate different mounting
scenarios. For instance, the boards could be stacked, mounted side by side or mounted on
an angle.
and plastic spacers to secure the MCR inside the product. The 100 mm cable allows the
Control Board and Antenna Board to be separated to accommodate different mounting
scenarios. For instance, the boards could be stacked, mounted side by side or mounted on
an angle.
Spacers between the shield and control pcb, ensure the shield remains fixed to the control
pcb, and eliminates shield deformation during assembly into the final device.
pcb, and eliminates shield deformation during assembly into the final device.